DLC
Listed
Wattage
Selectable
Color
Selectable
Sorry, this product is not available to purchase.
- Estimated life of 91.3 years based on 3 hours use per day
- Adjustable color
- Adjustable wattage
Subtotal: $564.95
Add 6 Items to Cart
Product Description–
ATG Electronics 48" dimmable wattage (25W/30W/40W) and color (3500K/4000K/5000K) selectable. Includes Integrated programmable motion and daylight harvesting sensor. LED Strip fixture. Ideal for storage, utility areas, coves, display cases, task, and general area lighting.
- 3-way wattage and color selectable
- Wattage selectable (25W/30W/40W)
- Color selectable (3500K/4000K/5000K)
- Includes programmable microwave motion and daylight harvesting sensor (IFS08-ET)
- Requires remote control RM-51 for programming (sold separate)
- Control Parameters/Remote Control Settings
- High Trim Brightness: 50/70/100% (default 100%)
- Motion Sensitivity: Off/Low/High (default high)
- Hold Time: 30sec/5min/15min/30min (default 5min)
- Bi-level Standy Dim Level: 0/10/30/50% (default 30%)
- Bi-level Standby Time: 1sec/5min/15min/30min/60min/infinity (default 60min)
- Daylight Sensing: Off/Low/High (default off)
- Alternative default modes
- Preset: trim (100%), sensitivity (high), hold time (5min), standby dim (30%), standby time (60min), and photocell (OFF)
- Mode A: trim (100%), sensitivity (low), hold time (30min), standby dim (50%), standby time (infinite), and photocell (CAL)
- Mode B: trim (100%), sensitivity (low), hold time (30min), standby dim (50%), standby time (15min), and photocell (CAL)
- Mode C: trim (100%), sensitivity (low), hold time (30min), standby dim (50%), standby time (15min), and photocell (OFF)
- Mode D: trim (50%), sensitivity (low), hold time (30min), standby dim (50%), standby time (30min), and photocell (CAL)
- Mode E: manual mode trim (100%)
- Mode F: daylight harvesting trim (50%) sensitivity (50%) hold time (15min)
- Solid die formed cold rolled steel housing
- Knockouts provided on back, ends and sides
- 0-10V dimming
Full Specs–
Brand | ATG Electronics |
Model Number | LNS-4FT-25-T1-F-G2-SW |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 25/30/40 Watts |
Fluorescent Equivalent
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
| 64/96 |
Line Voltage | 120-277 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 3500/4000/5000 |
Lowest Color Temperature (Kelvin)
The warmest color temperature that can be set for a color-tuneable product.
| 3500 |
Highest Color Temperature (Kelvin)
The coolest color temperature that can be set for a color-tuneable product.
| 5000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 3789/4491/5931 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 100000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -4 to 122 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 47.3 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 4.41 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 3.1 |
Nominal Length (ft)
The length to the nearest foot that linear bulbs or fixtures will fit.
| 4 |
Finish
The decorative finish of the item.
| White |
Manufacturer Warranty | 5 year limited |
Photocell | Yes |
Motion Sensor | Yes |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Dusk to Dawn
Indicates that a lamp will self-activate when light levels dip below a certain level.
| Yes |
Color Selectable
Bulb is capable of emitting several different colors that are selectable by the user after it has been installed.
| Yes |
Wattage Selectable
Device will work with a range of different wattages.
| Yes |
Controls Ready
Indicates whether a fixture is capable of taking an integrated motion or light control, although the control is not included in the product itself.
| Yes |
DLC Listings | P345M6MH Standard, S-5H92I8 Standard |