Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Maxlite Dimmable 4 ft. LED Vapor Tight Fixture, Wattage and Color Selectable, C-Max Compatible

SKU: 105607 | Ordering Code: LSV4U23WCSCR  | UPC: 767627008276

$106.49each
Add to Cart
Save to BulbTrack ?

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

This item qualifies for free ground shipping *

Options

Length (in)
24.8 49.8 94.4

Product Highlights

  • Estimated life of 91.3 years based on 3 hours use per day
  • Adjustable color
  • Adjustable wattage
Description
  • DLC
    Listed
  • ETL
    Listed
  • Wattage
    Selectable
  • Color
    Selectable

Maxlite's dimmable 4' LED Vapor Tight fixture is wattage selectable (23W/35W/48W) and color selectable (3500K/4000K/5000K) . Use the available USB-C port to install a C-Max control node for motion sensing. High performance optics delivers beautiful even light with excellent color rendering and low glare. Ideal for utility lighting, parking garages, stairwell lighting, car washes, agricultural and any place where water may get into a fixture.

  • Controls ready - Can be paired with Maxlite's C-Max control node # 105564 for motion sensing and daylight harvesting. Use remote control # 105567 for easy commissioning - both sold separately
  • Eqivalent up to a 3 x 32W T8 fluorescent
  • Non-corrosive polycarbonate lens and housing
  • Stainless steel latches
  • Surface mounting (accessories sold separately)
  • IP65 rated 
  • 0-10V dimming - Compatible with Lutron NTSTV-DV-WH and DVSTV-WH and Legrand/Wattstopper TSD4FBL3PTC and RH4FBL3PTC dimmers
  • DLC Listed:
    • Stairwell - Premium ID PMCIH8UZ
    • Direct Linear Ambient - Standard ID PP0823P9
  • 10 year limited warranty with labor allowance:
    • Product must be rated for the application, operated ≤ 16 hours per day, in ambient -4°F to 77°F. For applications with ambient temperature greater than 77°F and up to 104°F the limited warranty is 5 years.
    • Labor allowance - Up to $25 per unit, registration required. Contact a Bulbs.com Lighting Specialist for details
    • It is not a requirement to register the warranty to receive warranty coverage, but you must register the warranty if you want to be eligible to receive the labor allowance associated with the 10 year limited warranty
Full Specs

Brand

MaxLite

Product Line

C-Max

Model Number

LSV4U23WCSCR
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
23/35/48 Watts
Fluorescent Equivalent
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
96

Line Voltage

120-277
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
80
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
3500/4000/5000
Lowest Color Temperature (Kelvin)
The warmest color temperature that can be set for a color-tuneable product.
3500
Highest Color Temperature (Kelvin)
The coolest color temperature that can be set for a color-tuneable product.
5000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
2990/4550/6240
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
100000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-40 to 104
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
49.8
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
5
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
3.5
Finish
The decorative finish of the item.
Gray

Housing

Polycarbonate

Mounting

Surface

Warranty

10 year limited
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes

Vapor Proof

Yes
DLC Listing
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are three categories, Standard, Premium and Horticultural, plus Luna for light-pollution minimization.
Standard
DLC Code
Code identifying the product in DLC (DesignLights Consortium) listings.
PP082BP9
Food Equipment Certification
The NSF (National Science Foundation) establishes minimum food protection and sanitation requirements for the materials, design, fabrication, construction and performance of food handling and processing equipment. The ETL (Edison Testing Laboratories) Mark is proof of product compliance to North American safety standards.
ETL
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes
Color Selectable
Bulb is capable of emitting several different colors that are selectable by the user after it has been installed.
Yes
Wattage Selectable
Device will work with a range of different wattages.
Yes