Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 120 watt bulb
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 1600 lumens |
|
Estimated Yearly Energy Cost $2.89
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
3000 K
|
| Energy Used24 watts |
Solais Lighting 3" Dimmable LED Track Fixture, Halo Track Type, 3000K, 25° beam angle, white finish. Compatible with Halo track. Excels in high-performance lighting applications that demand the lumen output, center beam and color rendering needed in high-end retail and commercial applications. Industry-leading thermal management system that incorporates active cooling for superior light output and performance.
- Fully dimmable
- Equivalent up to a 120W halogen
- Superior light output
- No heat sinks
- Minimizes bulk and weight
- Allows for greater drive current
- Maximizes airflow
- Lower operating temperature
Compatible with the following Lutron dimmers:
- Diva DV-600
- Diva CL DV(W)CL-153P
- Diva DVELV-300P
- Ariadni AY-600
- Skylark S-600
- Skylark Contour CTCL-153P
- Maestro MA-600
- Maestro Wireless MRF2-6ND
- Maestro Wireless MRF2-6ELV
- Maestro MALV-600
- Nova NLV-600
- Toggler TG-600PR
Brand | Solais Lighting, Inc. |
Product Line | Halo Track |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 24 Watts |
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
| 120 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 85 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 3000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 1600 |
Center Beam Candle Power
Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area.
Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting.
Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
| 6440 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 25 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 4.45 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 3 |
Finish
The decorative finish of the item.
| White |
Warranty | 5 year limited |
Lighting Facts Approved
Lighting Facts is a program of the US Department of Energy, designed to ensure that the LED products you find on the market meet your expectations for performance.
| Yes |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |