2-Pin CFL Ballasts | 4-Pin CFL Ballasts | Fulham RaceHorse CFL Ballasts

Fulham RaceHorse 3 Electronic CFL Ballast Contractor Kit 120V - 277V

SKU: RHA-UNV-226-K | Ordering Code: RHA-UNV-226-K | UPC: 847098007111

Fulham RHA-UNV-226-K RaceHorse 3 Electronic CFL Ballast Contractor Kit 120V - 277V

Printer friendly

$52.49each

Add to Cart

Save to BulbTrack

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 2 to your cart to get free ground shipping *

Product Highlights

Ignites up to two 4-Pin/T5HO lamps

Description

Fulham Brand RaceHorse 3 Electronic CFL Ballast Contractor Kit. Includes RaceHorse ballast, snap mount stud adapter plate, lead wire set and wire removing tool. 120 - 277 Volt.

Ballast Lamp Starting Mode: Programmed Start
End-of-lamp-life protection
Cold starting
Auto-restart
Versatile mounting
Dual entry color coded connector

RH3-UNV-226-K CFL Ballast Ignites:

One - 13CFT/E, 26CFQ/E, 36CFTR/E, 32CFTR/E, 42CFTR/E. 2D21W, 2D28W, 2D38W, T5CR22, FT18W, FT36W, T5CR40, FT24/E, 57CFM.
Two - 13CFT/E, FT18W, 26CFQ/E, 26CFTR/E, FT24/E, 2D21W, F24T5HO.

Full Specs

Brand	Fulham
Input Volts	120-277
Input Watts	57
Number of Lamps	2
Ballast Type Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.	Electronic
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	5
Width (in) For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.	2.4
Height (in) For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.	1

Power Factor	0.98
Total Harmonic Distortion (THD) Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.	10%
Lamps by Wattage	1x13W-42W, 2x13W-26W
Warranty	3 years
Ballast Lamp Type The type of bulb the ballast can fire.	4-Pin/T5HO
Maximum Current (Amps) The maximum amount of Amps that a ballast can hold.	0.47
Maximum Load (Watts) The maximum power that a product can handle.	57
Start Type For Ballasts, indicates the method the ballast uses to start its bulbs. HID ballasts can be Probe or Pulse start. Fluorescent ballasts can be Rapid, Instant or Programmed start. For HID and Fluorescent bulbs, indicates the start-type of ballast that the bulb will work with.	Programmed