Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

MaxLite 9 Watt, 50W Halogen Equivalent, DIMMABLE, LED 4" Recessed Downlight Fixture - New Construction

SKU: 71784 | Ordering Code: RF409ICAT30W

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a conventional 50 watt bulb
  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 500 lumens
Estimated Yearly Energy Cost $1.08
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
3000 K
Energy Used9 watts

MaxLite Brand DIMMABLE 4" LED Downlight Retrofit Fixture for new construction.  Recessed fixture is supplied with a performance-leading LED module and white trim ring that installs flush to the ceiling.  

  • Dimmable at 120V only

  • Suitable for dry and wet locations
  • Rated for direct insulation contact
  • Includes 13" hanger bars with pre-installed nails - just hammer and go
  • Housing and trim are gasketed to maximize building energy efficency
  • Hanger bars feature notches for easy installation to grid ceilings, which can be secured using wire or screws
  • Polycarbonate lens 
  • 500 Lumens initial light output is comparable to most 50 Watt incandescent lamps, while saving 41 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 50,000 hours of operation as it does when brand new

  • Compatible with the following 120V dimmers
    • Lutron Nova T Ntelv 300 & 600
    • Lutron Diva Dvelv 300P & 303P
    • Leviton Acenti Ate06-1Lw
    • Trimatron 703W

CHECK PRODUCT FIT BEFORE INVESTING IN MANY - Product May Not Fit in your application.

Full Specs

Brand

MaxLite

Model Number

RF409ICAT30W
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
9 Watts
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
50 Watts

Line Voltage

120-277
Base
The end (or ends) of the lamp that fits into the socket.
Wired
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
80
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
3000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
500
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
90
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
8.12
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
6.37
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
5.56
Finish
The decorative finish of the item.
White

Housing

Aluminum

Mounting

Hanger bars for joists or grid ceilings
Installation Type
The way in which a fixture attaches to its relevant surface.
4" Can

Warranty

5 year limited
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes