Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Overdrive Dimmable 16 Watt LED Jelly Jar Retrofit Fixture, 120V, 3000K

SKU: 723 | Ordering Code: L16EH80DIM-W/LB/30K  | UPC: 879939007233

$19.89each
Add to Cart
Save to BulbTrack ?

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Order within the next 9 hours 48 minutes to ship today

Add 5 to your cart to get free ground shipping *

Options

Color Temperature (Kelvin)
Color Temperature Guide 3000 5000

Product Highlights

  • Energy efficient replacement for a conventional 125 watt bulb
  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 1970 lumens
Estimated Yearly Energy Cost $1.93
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
3000 K
Energy Used16 watts
  • ENERGY
    STAR

The dimmable 16 watt Soft White 3000K 120V LED Jelly Jar retrofit from Overdrive comes with both a medium (E26) screw base pigtail and hard wire pigtail for quick-connect install. 

  • Compatible with MOST Jelly Jar incandescent fixtures
    • If not, use J-Box Adapter Ring Kit (SKU 653, Order Code LEH80AD) SOLD SEPARATELY
    • Use the E26 quick-connect to convert medium screw base jelly jars
    • Use the hard wire quick-connect to convert CFL jelly jars 
  • Suitable for indoor and outdoor use in wet locations (IP66 rated)
  • Is a cost effective lighting solution for the harshest environments where protection from corrosion, dust and high humidity is required
  • Glass free, vibration- and impact-resistant construction
  • Has surge protection up to 2500V
  • Provides uniformly distributed and diffused light avoiding bright spots and shadows
  • NOT recommended for use above commercial grills, fryers, etc. because heat build up will shorten life
  • Compatible with Lutron DVCL-153P, CTCL-153P and MACL-153M dimmers
  • DLC listed under Outdoor Non-Cutoff and Semi-Cutoff Wall Mounted Area Luminaires

Product Documents

Full Specs

Brand

Overdrive

Model Number

L16EH80DIM-W/LB/30K
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
16 Watts
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
125 Watts

Line Voltage

120
Base
The end (or ends) of the lamp that fits into the socket.
Medium (E26)
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
80
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
3000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
1970
Center Beam Candle Power
Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
480
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-4 to 113
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
5.3
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
4.1
Finish
The decorative finish of the item.
White

Mounting

Ceiling

Warranty

5 year limited
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Yes
ENERGY STAR Certified
ENERGY STAR is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. ENERGY STAR-certified devices use less energy without compromising functionality.
Yes
ENERGY STAR Number
Number identifying the product in ENERGY STAR certification listing.
2358823
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes