Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Philips Dimmable 4W Warm Glow 2700K to 2200K 35° MR16 LED Bulb, GU10 Base, Enclosed Fixture Rated, Title 20 Compliant

SKU: 471565-2 | Ordering Code: 4GU10/LED/927-22/F35/G/WG/T20  | UPC: 046677471569

$9.79each
Add to Cart
Save to BulbTrack ?

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Free ground shipping on orders over $99*

Product Highlights

  • Energy efficient replacement for a conventional 50 watt bulb
  • Estimated life of 22.8 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Philips MR-16 Warm Glow dimmable 2700K-2200K 4 watt flood GU10 base LED bulb generates as much light as many 50 watt halogen bulbs. 

  • Title 20 compliant
  • Suitable for use in enclosed fixtures
  • The more you dim the warmer the light
  • No lead or mercury means easy and environmentally safe disposal
  • Saves 46 watts in electricity compared to a 50 watt halogen
  • Very long life - Rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
  • Compatible with Lutron DV-600P and DVELV-300P, a maximum of 20 bulbs per circuit

Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Brand

Philips Lighting

Product Line

Warm Glow

Model Number

4GU10/LED/927-22/F35/G/WG/T20
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
4 Watts
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
50 Watts
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
120
Base
The end (or ends) of the lamp that fits into the socket.
GU10
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
MR-16
Bulb Color
The color of the light produced by a bulb
Warm White
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
90
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
2700/2200
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
380
Center Beam Candle Power
Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
700
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
Clear
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
LED
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
25000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-4 to 104
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
35
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
2.2
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
2

Warranty

5 year limited
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes
Rated for Fully Enclosed Fixtures
Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
Yes