Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Product Description–
Lighting Facts Per Bulb |
| Brightness 1125 lumens |
|
Estimated Yearly Energy Cost $2.41
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
5500 K
|
| Energy Used20 watts |
TCP 20 Watt Blazer LED Wallpack is designed for applications that require clean lighting with a long life and low maintenance requirement. This includes overnight security lighting for buildings, entrance lighting and overhead door lighting. This Blazer 20 watt wallpack is a more efficient alternative to metal halide, high pressure sodium and fluorescent wall wallpacks. This LED wallpack is perfect for hard to reach areas that require clean lighting.
- Equivalent to a 35-70 watt high pressure sodium
- Uses 15 high-power LumiLED Rebel LEDs
- Constructed from die cast aluminum, which is powder coated in a durable brown finish
- Impact resistant non-yellowing lens for maximum light output over the life of the luminaire
- IP 65 weather rating
- Operating temperature: -20°F - 140°F
- Equivalent up to a 35 watt high pressure sodium or a 100 watt metal halide
Full Specs–
Brand | TCP |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 20 Watts |
Line Voltage | 120-277 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 71 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5500 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 1125 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 5.5 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 7.5 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 13 |
Finish
The decorative finish of the item.
| Brown |
Housing | Die cast |
Mounting | Wall mounted |
Installation Type
The way in which a fixture attaches to its relevant surface.
| Flush |
Manufacturer Warranty | 5 years limited |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |