Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Product Description–
Lighting Facts Per Bulb |
| Brightness 500 lumens |
|
Estimated Yearly Energy Cost $1.08
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
3000 K
|
| Energy Used9 watts |
MaxLite dimmable 9 watt 4" LED downlight retrofit fixture replaces existing 50 watt R20 incandescent lamps with a more energy efficient, longer lasting, and more technologically advanced alternative. Comes with an E26 medium screw base adapter that can be used with most 4" housings, including IC/airtight and non-IC incandescent recessed housings. Suitable for damp or wet locations, including kitchens and showers.
-
Dimmable at 120V only
- Installs into 4" recessed cans using blade springs
- Polycarbonate lens
-
Perfect to use anywhere you are using R20 lamps in recessed ceiling fixtures
-
No lead or mercury means easy and environmentally safe disposal
-
500 lumens initial light output is comparable to most 50 watt incandescent lamps, while saving 41 Watts in electricity
-
VERY long life - rated to still put out 70% as much light after 50,000 hours of operation as it does when brand new
- Compatible with the following 120V dimmers
- Lutron Nova T Ntelv 300 & 600
- Lutron Diva Dvelv 300P & 303P
- Leviton Acenti Ate06-1Lw
- Trimatron 703W
-
Compatible with the following recessed cans
-
Halo - H99T, H99RT, H99ICTAll-Pro - ET400, ET400R, ET400RT0
- Juno - TC1, TC1R, IC1P
- ALL-Pro - ET400, ET400R, ET400RT
- Capri - R4, RR4, R4ASIC
- Lithonia - L3, L3R
- Thomas - PS4, PS4RM, PS4ASIV
DO NOT "hot swap" this fixture.
Full Specs–
Brand | MaxLite |
Model Number | RR40930W |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 9 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120/277 |
Base
The end (or ends) of the lamp that fits into the socket.
| Medium (E26) |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 3000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 500 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 90 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 3.5 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 5 |
Finish
The decorative finish of the item.
| White |
Housing | Aluminum die-cast |
Mounting | Blade spring |
Manufacturer Warranty | 5 year limited |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |