Power Sentry Electronic Emergency Ballast 120-277V, 500 Initial Lumen Output

SKU: 223NM9 | Ordering Code: PSQ500QD MVOLT M12 | UPC: 820476730016

Printer friendly

$112.79each

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

This item qualifies for free ground shipping *

Product Highlights

Ignites up to two T5/T5HO/T8/T8HO/CFTR/CFQ lamps

Description

Power Sentry Electronic Emergency Ballast for fluorescent fixtures. Provides 500 lumens with 90 minutes of emergency power when AC power is interrupted. 120-277 line voltage.

Ignites various CFL (up to 40W) and also linear fluorescent bulbs up to a 4-foot, 32W bulb.
For use in 1-lamp (17-40W) or 2-lamp (18-40W) applications.
Approved for use in damp locations
Frequency: 50/60hz
Max AC Input: 2.5W
Max AC Amps: 0.29
Minimum Dischare Time: 90 Minutes
Minimum Recharging Time: 24 Hours
Maximum Initial Light Output: 500 Lumens

Full Specs

Brand	Lithonia Lighting
Model Number	PSQ500QD MVOLT M12
Input Volts	120-277
Initial Lumen Output The lumen output at first start-up.	500
Number of Lamps	1/2
Ballast Type Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.	Emergency
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	9.5
Width (in) For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.	2.5

Height (in) For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.	1.2
Lamps by Wattage	1x17W-40W, 2x18W-40W
Warranty	3 years limited
Ballast Lamp Type The type of bulb the ballast can fire.	T5/T5HO/T8/T8HO/CFTR/CFQ
AC Input (Watts) The amount of watts to operate emergency lamps.	2.5
Damp Location Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment	Yes
Not For Sale In This bulb falls within State-defined sales restrictions for the listed States.	CA