Sorry, this product is not available to purchase.
On
sale
Lutron Maestro® Dual Circuit SIngle Pole Occupancy Sensing Switch combines a Maestro switch with an in-wall, passive infrared (PIR) occupancy or partial-on sensor. The sensor is intended to control two circuits or bi-level control of two circuits, as required by certain energy codes, i.e., ASHRAE.
Switches all lighting loads: Incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent and electronic fluorescent
- Passive infrared sensor with exclusive Lutron XCT™ Technology for fine motion detection
- 180° sensor field-of-view
- Tamper resistant PIR lens
- Up to 30 ft x 30 ft (9m x 9m) major motion coverage and 20 ft x 20 ft (6m x 6m) minor motion coverage
- Can be set to Auto-On/Auto-Off or Manual-On/Auto-Off
- Meets Title 24/Title 20 requirements for multi-level lighting and for Partial-On sensors
- Adjustable timeout for each circuit (1, 5, 15 or 30 minutes)
- Works with standard mechanical 3-way switch or companion switch
- Sensitivity adjustment (High/Low)
- Crush/tamper resistant lens
- Switches fan loads at 120V
- 6 A of lighting load per circuit at 120-277V
- 4.4 A of fan load per circuit at 120V
- Ground or neutral wire required
Wallplate not included. A screwless wallplate can be purchased separately. See Lutron # CW-1-WH.
Brand | Lutron Electronics |
Product Line | Maestro |
Model Number | MS-PPS6-DDV-WH |
Line Voltage | 120-277 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| 32 to 104 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.9 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 4.7 |
Depth (in)
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
| 1.6 |
Finish
The decorative finish of the item.
| White |
Range of Motion (degrees) | 180 |
Warranty | 5 year limited |
Maximum Current (Amps)
The maximum amount of Amps that a ballast can hold.
| 6 |
Compatibility
Also known as load type, the bulb technology that a control can work with, such as LED, Fluorescent, CFL, Incandescent.
| LED/CFL/Incandescent/Halogen/Fluorescent |
Switch Mechanism | Button |
Switch Function
The capability for controling lighting from one or more location. Single pole switches can be used for one location, 3-Way for two, and wireless controls might control multiple locations.
| Single Pole/3-Way |
Load Rating (Volts)
The voltage range that a control can handle.
| 120-277 |
Smart Use Profile
Smart lighting covers a range of applications. This provides a set of broad categories for distinguishing different applications.
| Programmable |
Dimming
Dimming ballasts provide dimming capability when used with an appropriate controller and lamp.
| Yes |
Wallplate Included | No |
Coverage Area (sq ft)
Maximum amount of space in squre feed that this unit is capable of effectively covering.
| 900 |
Recommended With This Product