Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

MaxLite 52 Watt LED Wallpack Fixture, Full Cutoff

SKU: 71136 | Ordering Code: MLLWP70LED50DS  | UPC: 767627125218

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a 250 watt HID bulb
  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 4400 lumens
Estimated Yearly Energy Cost $6.26
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
5000 K
Energy Used52 watts
  • DLC
    Listed

MaxLite 52 Watt LED wallpack fixture. Equivalent up to a 250 metal halide. Heavy-duty cast aluminum one-piece housing, polyester coated, rust and corrosion proof. Fixture is sealed to be dirt and bug proof. High quality anti-shock Boran glass lens. Aluminum components in the LED module act as heat sinks to reduce heat and add to life. An efficient replacement for metal halide and high pressure sodium fixtures. Can mount to recessed outlet box or direct to surface. Dusk to Dawn/Occupancy sensor compatible.  Also available in white.

  • ETL and wet location listed
  • DLC qualified
  • Dark Sky compliant

 

Full Specs

Brand

MaxLite

Model Number

MLLWP70LED50DS
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
52 Watts
HID Equivalent
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
250

Line Voltage

120-277
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
73
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
5000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
4400
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
16.93
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
13.66
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
9.06
Finish
The decorative finish of the item.
Dark Bronze

Housing

Aluminum

Mounting

Can be mounted to electrical box or direct to surface

Warranty

5 year limited
Dark Sky Compliant
Dark Sky Compliant products have been approved by the International Dark Sky Association (IDA), which ensures that the Upward Light Output Ratio of the product is deemed "full cut-off" or "fully shielded". This means that the luminous intensity (in candelas) at or above an angle of 90 above nadir is zero, and the luminous intensity (in candelas) at or above a vertical angle of 80 above nadir does not numerically exceed 10% of the luminous flux (in lumens) of the lamp or lamps in the luminaire.
Yes

Photocell

Optional

Motion Sensor

Optional
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes
DLC Listing
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are three categories, Standard, Premium and Horticultural, plus Luna for light-pollution minimization.
Standard
Lighting Facts Approved
Lighting Facts is a program of the US Department of Energy, designed to ensure that the LED products you find on the market meet your expectations for performance.
Yes