Sorry, this product is not available to purchase.
- Energy efficient replacement for a 200 watt HID bulb
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 11900 lumens |
|
Estimated Yearly Energy Cost $10.24
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
5000 K
|
| Energy Used85 watts |
MaxLite 85 watt high bay fixture is designed for 25 foot and higher ceiling applications in warehouses, gymnasiums, general manufacturing and general task areas. With an enclosed power supply housing and covered optics, these units are designed for durability in difficult installation locations. An efficient, energy saving replacement for a 200 watt metal halide fixture.
- Aluminum construction and heat sink finning
- Polycarbonate lens cover
- Aluminum LED light engine
- Annular polished optic collimator for 110 degree beam angle
- Enclosed wiring and driver compartment
- Slide out driver tray service feature enables the fixture to remain hanging
- 1/4" eyebolt attachment provided
- 0-10V dimming - Requires power pack relay for wall control, Lutron # DVSTV
Brand | MaxLite |
Model Number | MLLHP085USD12/W |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 85 Watts |
HID Equivalent
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
| 200 |
Line Voltage | 120-277 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 11900 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 110 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 11 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 11.75 |
Finish
The decorative finish of the item.
| Full paint after fabrication |
Housing | Aluminum |
Mounting | 1/4" Eyebolt |
Warranty | 5 year limited |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |