Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Halco 24" Vapor Tight LED Fixture Wattage and Color Selectable

SKU: 28090 | Ordering Code: LVPT-2-WS-CS-U  | UPC: 807154280902

Halco Lighting 28090 LVPT-2-WS-CS-U Halco 24" Vapor Tight LED Fixture Wattage and Color Selectable
Halco Lighting 28090 LVPT-2-WS-CS-U Halco 24" Vapor Tight LED Fixture Wattage and Color SelectableHalco Lighting 28090 LVPT-2-WS-CS-U Halco 24" Vapor Tight LED Fixture Wattage and Color SelectableHalco Lighting 28090 LVPT-2-WS-CS-U Halco 24" Vapor Tight LED Fixture Wattage and Color Selectable
  • DLC
    Listed
  • NSF
    Certified
  • Wattage
    Selectable
  • Color
    Selectable
$83.99each
Fixture
Add to Cart
Save to BulbTrack ?

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 2 to your cart to get free ground shipping *

Options

Length (in)
24 47 95

Product Highlights

  • Estimated life of 68.5 years based on 3 hours use per day
  • Adjustable color
  • Adjustable wattage
Complete Your Solution

Product Description

Halco dimmable 2' LED Vapor Tight fixture is wattage selectable (20W/25W/30W) and kelvin selectable (3500K/4000K/5000K).  Housed in polycarbonate silicon perimeter gasket with brackets for mounting. Ideal for parking garages, car washes, stairwells, utility lighting and any place where water may get into a fixture 

  • Non-corrosive one piece (PC) polycarbonate housing and frosted lens
  • IP66 rated
  • NSF/ANSI 2 Listed
  • Stainless steel clips
  • 0-10V dimming
  • Lighter weight housing for easy installation
  • Surface mounting

Product Documents

Full Specs

Brand

Halco Lighting

Model Number

LVPT-2-WS-CS-U
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
20/25/30 Watts
Fluorescent Equivalent
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
34

Line Voltage

120-277
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
80
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
3500/4000/5000
Lowest Color Temperature (Kelvin)
The warmest color temperature that can be set for a color-tuneable product.
3500
Highest Color Temperature (Kelvin)
The coolest color temperature that can be set for a color-tuneable product.
5000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
2920/3600/4290
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
75000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-22 to 104
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
24
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
5
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
3.7
Nominal Length (ft)
The length to the nearest foot that linear bulbs or fixtures will fit.
2
Finish
The decorative finish of the item.
Gray

Housing

Polycarbonate

Mounting

Surface

Manufacturer Warranty

5 year limited
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Yes

Vapor Proof

Yes
Food Equipment Certification
The NSF (National Science Foundation) establishes minimum food protection and sanitation requirements for the materials, design, fabrication, construction and performance of food handling and processing equipment. The ETL (Edison Testing Laboratories) Mark is proof of product compliance to North American safety standards.
NSF
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes
Color Selectable
Bulb is capable of emitting several different colors that are selectable by the user after it has been installed.
Yes
Wattage Selectable
Device will work with a range of different wattages.
Yes

DLC Listing

PLI163V7LBNX Standard