Today's Offers
Today's OffersHide
Get a choice of Yeti products with qualifying purchases, use code YETILUCK at checkout.
15% off all Lunera products. Use promo code LUNERA15 at checkout.
New low prices on brand bulbs
Get a free Monkey fan with this BloomBoss kit. Use promo code MONKEY at checkout.
FREE SHIPPING on orders over $99

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

MaxLite 40 Watt, 48" Non-Dimmable Utility Wrap LED Fixture, 4000K

SKU: 108054 | Ordering Code: LSUECO-4NU4040-P (107666)  | UPC: 767627315152

Sorry, this product is not available to purchase.

Product Highlights

  • Estimated life of 45.7 years based on 3 hours use per day

Lighting Facts Per Bulb

Brightness 4340 lumens
Estimated Yearly Energy Cost $4.82
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day45.7 years
Light Appearance
4000 K
Energy Used40 watts

Maxlite's cost effective LED Utility Wrap fixture is constructed with a full length acrylic lens and one piece white fabricated steel body. Designed to meet or exceed 7-8Fc at an 8' installation height. Ideal for utility lighting and stairwell lighting. 

  • Surface mounted
  • Universal voltage 120-277
  • Humidity - 20-85% RH, non-condensing
  • Suitable for damp locations
  • UL, FCC and DLC
Full Specs



Model Number


Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
40 Watts

Fluorescent Equivalent

The total wattage of fluorescent lamps in a fixture that this fixture replaces.
Fluorescent Equivalent

Line Voltage



Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (Lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
Operating Temperature (°F)
-4 to 113

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)


The decorative finish of the item.





Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location

DLC Listed

Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design.
DLC Listed

DLC Code

Code identifying the product in DLC (DesignLights Consortium) listings.
DLC Code
Customers Also Viewed
Customer Reviews
Q & A