Sorry, this product is not available to purchase.
- Estimated life of 54.8 years based on 3 hours use per day
Lighting Facts Per Bulb
|Brightness 7096 lumens|
Estimated Yearly Energy Cost $7.43
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day54.8 years
|Energy Used61.7 watts|
Universal Everline 8' LED strip retrofit kit is an energy efficient LED alternative to traditional linear fluorescent strip fixtures. Not only does it offer energy savings, it also helps reduce maintenance costs due to its long lifetime. Equivalent to a two-lamp F96T8 fluorescent.
Kit includes LED lensed pre-mounted module, Everline 0-10V dimmable LED driver pre-mounted, wiring, mounting hardware and installation instructions. Suitable for an 8' non-lensed strip fixture, minimum wiring compartment dimensions 2.5" depth and 2" width.
- Retrofits an 8 ft. fluorescent strip fixture to LED
- Fast and easy to install
- No redesign or revised layout needed
- Universal mounting compatible with most strip manufacturers
- Panel is 23 gauge painted steel
- Diffuser provides broad, even light distribution
- 0-10V dimmable LED driver - Compatible with Lutron DVSTV-WH dimmer
- Suitable for dry and damp locations
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-4 to 100
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
|Mount to existing fluorescent strip housing
|7 year limited
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are two levels, Standard and Premium
Code identifying the product in DLC (DesignLights Consortium) listings.
Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
Recommended With This Product