Sorry, this product is not available to purchase.
- Estimated life of 91.3 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
11 Watt Replacement! Bulbrite Brand 1W, LED Transparent Red, Medium Screw Base, S-14 Sign Lamp (dia. 1 3/4", length 3 1/2"), UL Wet Location Rated.
Brand | Bulbrite |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 1 Watt |
Base
The end (or ends) of the lamp that fits into the socket.
| Medium (E26) |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| S-14 |
Bulb Color
The color of the light produced by a bulb
| Red |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 3.3 |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 100000 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 3.5 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 1.75 |
Product Notes: Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation.