Today's Offers
Today's OffersHide
Buy 3, get 1 free for Bulbs.com brand LED reflectors. Follow link for details.
FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com

The LED Authority

Greenlite up to 42 Watt Equivalent, 13 Watt, 120-277 Volt HYBRID 4pin G24q Non-Dimmable 4000K BR30 LED Bulb

SKU: 40221 | Ordering Code: LED13BR30/840/G24Q  | UPC: 635279402219

Sorry, this product is not available to purchase.
  • Energy efficient replacement for a conventional 42 watt bulb
  • Estimated life of 45.7 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Lighting Facts Per Bulb

Brightness 1070 lumens
Estimated Yearly Energy Cost $1.57
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
4000 K
Energy Used13 watts

Greenlite non-dimmable Hybrid BR30 LED bulb that generates as much light as many 42 watt CFL bulbs. This bulb can be used with or without a ballast which means there's no need to buy an expensive ballast once the current ballast stops working. Simply bypass the ballast and install the same bulb to line voltage, saving more money over the life of the bulb. Replacing a CFL with an LED will create greater light output, less energy usage, and a longer life. These bulbs are likely to be found in retail stores, fitness clubs, nursing homes, etc. where the cool white color will illuminate areas for safety and provide a neat and clean feel.

Not recommended for use in fully enclosed fixtures because the heat buildup will shorten the life of the bulb.

  • Plug & Play or Bypass PL Direct Replacement
  • Plug & Play (with ballast): Replaces CFL 13W, 18W, 26W, 32W, 42W
  • Ballast Bypass: achieve 1070 lumens, 13W to 18W, 120-277V
  • Shatterproof
  • Long Neck
  • Fits G24q or G24x base
Full Specs

Brand

Greenlite Corp.

Model Number

LED13BR30/840/G24Q

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
13 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
42 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120-277

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
G24q

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
BR-30

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Cool White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
4000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
1070

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Frosted

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
 
Beam Angle (°)
120

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
5.79

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
3.75

Warranty

5 year limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Ballast Bypass

Bypassing (removing) the traditional fluorescent ballast will allow the fixture to run on line voltage. A ballast is not needed to power this lamp.
 
Ballast Bypass
Yes

Ballast Compatible

Indicates that an LED lamp can work with an existing fluorescent or HID ballast. Simply swap out the lamp.
 
Ballast Compatible
Yes
Customers Also Viewed
Customer Reviews
Q & A