Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 75 watt bulb
- Estimated life of 36.5 years based on 3 hours use per day
Lighting Facts Per Bulb
|Brightness 800 lumens
Estimated Yearly Energy Cost $1.4
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day36.5 years
|Energy Used11.6 watts
Bulbrite dimmable 6" LED downlight is built with an integral junction box that eliminates the need for a traditional recessed housing (can) or J-box, saving installers time and money. Simply connect the junction box wiring to a light switch and place it into the ceiling. The spring-loaded clips will hold the downlight into the ceiling.
Three easy installation steps:
- Cut appropriate size hole in ceiling
- Connect fixture to wired wall switch
- Clip fixture into opening and enjoy your new light
Easy to install in new construction and retrofit projects, the downlight has a slim body that fits into shallow ceilings. Its white baffle trim blends seamlessly into interiors and reduces glare for soft eye pleasing illumination.
- Mounts directly into ceiling, no housing (recessed can) required
- IC and airtight rated for direct installation
- Edge lit for more diffused, less glary light
- Compatible with Lutron AYCL, DVCL, CTCL, and MACL dimmers.
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The wattage value of an incandescent or halogen lamp of similar brightness.
The end (or ends) of the lamp that fits into the socket.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-4 to 104
|Beam Angle (°)
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
The decorative finish of the item.
The way in which a fixture attaches to its relevant surface.
|5 year limited
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Recommended With This Product