Sorry, this product is not available to purchase.
Everline L12V60UNV-Q constant voltage LED driver is ideal for maximum energy savings and control applications, and is ideal for applications where water may come in contact. This non-dimmable driver features high efficiency constant voltage. Each lead is color coded and is 12.5" long. Ideal for wet locations.
Constant voltage drivers are typically used in outdoor fixtures and signs. These LED drivers provide a constant DC voltage output, typically 12V or 24V. Constant voltage drivers are ideal for sign applications because of their flexibility to connect a wide range of modules in parallel.
- Non-dimmable output
- Input voltage 120-277V
- Input Current Max. - 0.58A/120V; 0.26A/277V
- Input Power Max. - 69 watts
- Input Frequency - 50-60 Hz
- Power Factor - > 0.90
- THD Max. - <10%
- Output Voltage - 12, +/-5%
- Output Current - 5.0A max.
- Output Power - 60 watt max.
- UL wet listed - IP67
- Formerly known as D12V60UNV-Q000I
Brand | Everline |
Input Volts | 120-277 |
Output Voltage
A measure of electrical potential, expressed in volts. Voltage "force" is the measurement of pressure that pushes electrical current through a conductor.
| 12 |
Input Watts | 69 |
Output Watts
The transformed power output from a transformer.
| 60 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -40 to 131 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 12.1 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.1 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1.5 |
Power Factor | >0.90 |
Total Harmonic Distortion (THD)
Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
| <10% |
Warranty | 5 year limited |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |