Sorry, this product is not available to purchase.
- Energy efficient replacement for a 320/400 watt HID bulb
- Estimated life of 45.7 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
On
sale
Keystone non-dimmable 130 watt 5000K LED retrofit lamp is a plug 'n play LED replacement for a 320 watt or a 400 watt Metal Halide lamp with an EX39 base. Ideal for high bay applications in warehouses.
Use only with compatible magnetic HID ballasts.
- Suitable for use in enclosed fixtures
- Replaces a 320W or a 400W metal halide lamp
- Compatible with existing magnetic HID ballasts (ANSI codes M59/M132/M135/M154/M155)
- Do not use in line voltage applications
- Direct LED replacement without changing the fixture
- Instant on. No warm up time compared to metal halide lamps
- Vertical mount base up installation only
- Frosted lens eliminates glare
- Does not support operations with electronic HID ballasts
- Includes safety sling for easy installation
- Input voltage is ballast dependent
DO NOT "hot swap" this lamp. Turn off fixture before replacing existing bulb. This lamp only operates on existing magnetic HID ballasts (M59/M132/M135/M154/M155). If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire.
Brand | Keystone |
Model Number | KT-LED130HID-V-EX39-850-S |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 130 Watts |
HID Equivalent
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
| 320/400 |
Base
The end (or ends) of the lamp that fits into the socket.
| Mogul (E39) |
Bulb Color
The color of the light produced by a bulb
| Bright White |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 11000/13000 |
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Frosted |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -40 to 85 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 120 |
Bulb Power Type
Defines how a lamp is powered, whether it needs a ballast or not, or can use either
| Ballast Compatible |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 9.3 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 7.9 |
Mounting | Vertical |
Warranty | 5 year limited |
Ballast Code
The ANSI (American National Standards Institute) code that the ballast conforms to. For HID bulbs, indicates that the bulb is compatible with ballasts that conform to that standard.
| M59/M132/M135/M154/M155 |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Rated for Fully Enclosed Fixtures
Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
| Yes |