Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 250 watt bulb
- Energy efficient replacement for a 50 watt HID bulb
- Estimated life of 91.3 years based on 3 hours use per day
Lighting Facts Per Bulb
|Brightness 2180 lumens|
Estimated Yearly Energy Cost $2.41
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day91.3 years
|Energy Used20 watts|
Maxlite non-dimmable 20 watt LED Flood Light Fixture is equivalent to a 250 watt quartz halogen or a 50 watt metal halide fixture. Features an integral listed driver, potted within a separate compartment to ensure cool operation and longer life. Can mount at a broad range of angles with a yoke style arm and a 1/2" NPT threaded nipple.
- Comes with a standard yoke and a 1/2" NPT fitting for easy installation
- Wide light distribution
- Aluminum die cast housing
- 10Kv surge protection
- Tempered glass
- Operating temperature: -40ºF to 113ºF
- Universal voltage 120-277V
- 10 year limited warranty with labor allowance
- Product must be rated for the application; operated ≤ 16 hours per day; in ambient -40°F to 113°F
- Labor Allowance - Up to $25 per unit; labor allowance up to $500 per unit available for an additional purchase. Contact a Bulbs.com Lighting Specialist for details
- It is not a requirement to register the warranty to receive warranty coverage, but you must register the warranty if you want to be eligible to receive the labor allowance associated with the 10 year limited warranty
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The wattage value of an incandescent or halogen lamp of similar brightness.
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-40 to 113
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
The decorative finish of the item.
|10 year limited
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.