Sorry, this product is not available to purchase.
Simkar enclosed gasketed weatherproof fluorescent fixture for four lamp tandem F32T8 lamps and 120-277 voltage. Ideal for demanding environments where reliability and performance are paramount. Stands up to the forces of wind, water, temperature extremes, dust, salt and abuse. The EN2 is an indoor/outdoor, corrosion proof, enclosed and gasketed fixture that does it all.
Lamps NOT included. Mounting hardware optional.
- The housings are made of custom reinforced, thermal-set polyester that is corrosion resistant
- Securely attached, over-center latching system that are tamper proof ready
- The horizontally ribbed 100% high impact acrylic injection molded lenses were engineered for superior strength, ease of cleaning and optical uniformity
- IP67 rated for dust free with temporary submersion under water for 30 minutes
- Certified for NSF high pressure wash down splash zone areas
The product image for this item has been provided by the manufacturer and may not accurately represent all specifications of this product. Please refer to the technical specifications of this product for the most accurate information.
Brand | Simkar |
Model Number | EN28RAWR4T32T8E4LU1 |
Line Voltage | 120-277 |
Number of Lamps | 4 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
| Electronic |
Bulb Type Supplied
Type of bulb supplied with the fixture
| None |
Replacement Lamp | F32T8 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 96 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 7.33 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 4.13 |
Watts per Bulb | 32 |
Housing | Thermal-set polyester |
Mounting | Surface, ceiling or wall |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
Vandal Resistant | Yes |
Recommended With This Product