Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 100 lumens |
|
Estimated Yearly Energy Cost $2.89
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
4200 K
|
| Energy Used24 watts |
Diode LED BLAZE™ BASICS 100 LED Tape Light Kit, 24V, 4200K, 16.4 ft. Spool with UL Listed OMNIDRIVE® Driver
Diode LED BLAZE™ Basics are new value engineered LED tape light leveraging the advances in efficient, cleaner technology, newer circuit design, streamlined manufacturing, and economies of scale. This flexible linear LED lighting features 90+ CRI, this enhanced flexible linear lighting is backed by a 7-year warranty.
Diode LED products support the needs of lighting design professionals, architects, electricians and contractors. Diode LED is solely focused on delivering high-quality and complete LED lighting solutions with superior performance and high quality color-rendering.
- 120° light beam angle
- 100 lumens per foot
- 90+ CRI
- Maximum run up to 55 feet
- OMNIDRIVE® Electronic Dimmable LED Driver offers superior dimming performance for the widest selection of dimming switches. The built-in electronic filter eliminates flicker and provides the smoothest dimming from 100% down to 10%. They offer superior dimming performance for an LED power supply when paired with: TRIAC dimmer controls, magnetic low voltage (MLV), electronic low voltage (ELV) and incandescent/halogen dimmer switches, as well as 3/4/5-way and on/off switching.
- Includes a 5 pack of tape-to-wire terminal block connectors
- Mounts with 3M Adhesive backing
- Cut points every 4 inches
Brand | Diode LED |
Product Line | Blaze Basics |
Energy Used
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 24 Watts |
Input Volts | 90-135 |
Output Voltage
Output Voltage
A measure of electrical potential, expressed in volts. Voltage "force" is the measurement of pressure that pushes electrical current through a conductor.
| 24 |
CRI
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 90 |
Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 4200 |
Brightness (Lumens)
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 100 |
Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -4 to 176 |
Length (in)
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 196.8 |
Width (in)
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 0.39 |
Warranty | 7 year limited |
Dimmable
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Recommended With This Product