Sorry, this product is not available to purchase.
Subtotal: $86.98
Add 2 Items to Cart
Product Description–
Adding a field installed network PIR motion sensor/daylight harvesting feature to Maxlite's C-Max outdoor fixtures is easy with the C-Max remote controlled network node. Remote control CN-REMOTE is required for programming.
- Compatible Maxlite C-Max Fixtures
- AE Series Area Fixtures (AE100UT3-WCS, AE150UT3-WCS, and AE300UT3-WCS)
- Remote control CN-REMOTE is required for programming (1 needed per site)
- Remote Control Settings
- High Trim: 50/75/100% (default 100%)
- Motion Sensitivity: Off/50%/100% (default 100%)
- Hold Time: 30sec/5min/15min/30min (default 5 minutes)
- Bi-level Standy Dim Level: 0/10/30/50% (default 50%)
- Bi-level Standby Dim Time: 10sec/5min/15min/30min/60min (default 30 minutes)
- Photocell Sensitivity: Off/Low/Medium/High (default off)
- Easy to install in the field with USB-C connection using pre-installed fixture receptacle
- Maximum mounting height 40ft
- Detection angle 120°
- IP66 wet location rated
- Title 20 compliant
This remote controlled PIR motion and daylight harvesting sensor allows for customization of individual fixtures, setting groups, multi-level dimming, scene creation, and scheduling all with the C-Max CN-REMOTE control.
Full Specs–
Brand | MaxLite |
Product Line | C-Max Basic Control |
Model Number | CN-RDMSB |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -40 to 130 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1.4 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 2.5 |
Manufacturer Warranty | 5 year limited |
Photocell | Yes |
Motion Sensor | Yes |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Title 20 Compliant
California Building Energy Efficiency Standards for Residential and Non-Residential Buildings.
| Yes |