Sorry, this product is not available to purchase.
- Energy efficient replacement for a 400 watt HID bulb
- Estimated life of 97.7 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 17130 lumens |
|
Estimated Yearly Energy Cost $18.07
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day97.7 years
|
|
Light Appearance
WarmCool
5500 K
|
| Energy Used150 watts |
DLC
Listed
MaxLite 150 Watt BayMax LED Dimmable Linear High Bay fixture with optional bi-level controls offers a classic fluorescent linear high bay housing with LED strips that resemble fluorescent tubes when lit. The same size and shape as a T8 fluorescent fixture with exceptional 100+ LPW output. Fits standard fluorescent accessories. Constructed of sheet steel for heat sink and thermal control and a specular reflector for higher lumens. A top side access door provides easy serviceability by enabling unobstructed driver access.
Equivalent to a 400W HID at 20-25 ft. height and equivalent to a 250W HID for heights greater than 25 ft.
- High efficacy LED boards with dual copper cladding for thermal dissipation
- 1-10V Dimming standard
- On/Off PIR motion sensor or Bi-level PIR motion sensor options available
- Wire guard and battery back up options available
- Housing has rear side access door for easy field access of control gear
- Operating temperature: -14°F to 104°F
- Suitable for continuois row mounting
- 22 gauge steel housing, post painted
- Class II UL listed dimming drivers
- 120-277V universal voltage. Other voltages available
- Standard V-hook included
- Standard knock outs at ends and rear
- LED lifetime to L70 at 77°F ambient is 107,000 hrs.
- RoHS compliant, no mercury
Brand | MaxLite |
Model Number | BLHT150USD4815 |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 150 Watts |
HID Equivalent
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
| 400 |
Line Voltage | 120-277 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 83 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5500 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 17130 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 107000 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 48 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 10 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 3 |
Finish
The decorative finish of the item.
| Epoxy powder coat |
Housing | Steel |
Mounting | V-hooks provided |
Warranty | 5 year limited |
DLC Listing
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are three categories, Standard, Premium and Horticultural, plus Luna for light-pollution minimization.
| Standard |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |