Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb
|Brightness 3000 lumens|
Estimated Yearly Energy Cost $3.13
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day45.7 years
|Energy Used26 watts|
Verbatim DLC listed 4 ft. LED strip fixture with dual motion sensors is ideal for stairwells, passageways, corridors, parking garages and any area with intermittent traffic.
- DLC listed
- Dual infrared motion sensors - Mount on each end for accurate motion detection
- Sensors rotate to optimize desired coverage
- Detection zone - 360° / 26 ft. at 8-10' installation height
- Detection angle - 140°
- Bi-level operation - 26 watt, 3000 lumen light output when motion is detected, dims to 33% (8.6 watt) output when motion is not detected
- ON time - 5 minutes
- 5000K- Crisp, cool, even light with minimum glare
- Heavy-duty, powder-coated galvanized metal housing
- Suitable for surface or suspended (chain) mounting
- Included mounting hardware: Junction box adapter plate, v-hooks and chain
- Side and base knockouts provided for ceilihg or wall mounting
|Verbatim Americas LLC
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-4 to 104
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
The decorative finish of the item.
|Powder coated galvanized metal
|Surface or suspended/Ceiling or wall
|5 year limited
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are two levels, Standard and Premium
Code identifying the product in DLC (DesignLights Consortium) listings.
Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
Recommended With This Product