Sorry, this product is not available to purchase.
- Estimated life of 36.5 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 25 lumens |
|
Estimated Yearly Energy Cost $0.06
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day36.5 years
|
|
Light Appearance
WarmCool
3000 K
|
| Energy Used0.5 watts |
Sea Gull Lighting Brand 2" Ambiance® Flexible LED Tape Light with white face. Economical, super bright. Connects to other sections of 12V LED Tape lighting. LEDs are on a flexible copper strip encased in optically clear protective coating. Works and dims with all 12VAC magnetic transformers. For increased light output LED tape lighting can also be powered by 12 VDC LED power supply unit. Installs easily on surfaces with included clips or self adhering industrial 3M adhesive (provided on back of strip).
Power supply required and sold separately. Use # 98050-12 for plug-in power or # 98061-12 for direct wire transformer.
- Versatile LED linear lighting, ultra low profile 1/8"H x 3/8"W - easily fits into any space, flexible bend lengthwise or curve laterally
- The look and feel of halogen and xenon while reducing energy and operating costs by up to 90%
- Lumen package is comparable to traditional undercabinet lighting 10W xenon to 20W halogen 4" to 6" on center
- Long 40,000 hour life lasts 20 times longer than halogen for maintenance free operation
- 12VAC or 12VDC operation, dimmable with a wide range of incandescent and ELV dimmers
- Maximum run length for 12V is 20 feet
- ETL listed, damp location
- Environmentally friendly - contains no mercury and emits no UV or IR
- Also available in 12", 5' and 16-12" sections and with a wide variety of connectors
Brand | Sea Gull Lighting |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 0.5 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 12 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 85 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 3000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 25 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 40000 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 2 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 0.375 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 0.125 |
Finish
The decorative finish of the item.
| White |
Mounting | Use self adhering industrial 3M adhesive (provided on back of strip) or included mounting clips. |
Warranty | 5 year limited |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |