Sorry, this product is not available to purchase.
- Energy efficient replacement for a 250 watt HID bulb
- Estimated life of 45.7 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Lighting Facts Per Bulb |
Brightness 9700 lumens |
Estimated Yearly Energy Cost $9.64
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
Life
Based on 3 hrs/day45.7 years
|
Light Appearance
WarmCool
5000 K
|
Energy Used80 watts |
- On
sale
Satco 80 watt non-dimmable retrofit LED lamp replaces up to a 250 watt metal halide lamp and is ideal for high bay applications.
When installing this lamp the ballast must be bypassed when present.
- If the existing fixture doesn't contain a surge protection device the manufacturer recommends a licensed electrician to install one in accordance with local electrical codes
- Suitable for use in enclosed fixtures
- Minimum compartment size: 13.5"L x 13.5"W x 12" H
- UL classified for damp locations
- No fan means a quiet operation
Do not "hot swap" this bulb. Turn off the fixture before replacing the bulb.
Brand | Satco Products, Inc. |
Model Number | 80W/LED/HID-HB/5K/120-277V |
Energy Used
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 80 Watts |
HID Equivalent
HID Equivalent
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
| 250 |
Volts
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120-277 |
Base
Base
The end (or ends) of the lamp that fits into the socket.
| Mogul (E39) |
Bulb Color
Bulb Color
The color of the light produced by a bulb
| Bright White |
CRI
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5000 |
Brightness (Lumens)
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 9700 |
Bulb Finish
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Opaque |
Bulb Technology
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -40 to 140 |
Bulb Power Type
Bulb Power Type
Defines how a lamp is powered, whether it needs a ballast or not, or can use either
| Ballast Bypass |
Length (in)
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 10.1 |
Diameter (in)
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 7.5 |
Mounting | Vertical |
Warranty | 5 year limited |
Damp Location
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Rated for Fully Enclosed Fixtures
Rated for Fully Enclosed Fixtures
Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
| Yes |