Sorry, this product is not available to purchase.
Product Description–
Simkar WHITE Plastic Damp Location Approved Fixed Optics Emergency Light with Two Stationary Incandescent Heads, Battery Backup, LED "Power On" Indicator, and Push-to-Test Switch. For either 120 or 277 Voltage. Surface Mount Only, Hardware Included.
Full Specs–
Brand | Simkar |
Line Voltage | 120-277 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
| None |
Battery | 6-volt, lead acid, maintenance-free. |
Bulb Type Supplied
Type of bulb supplied with the fixture
| Incandescent |
Replacement Lamp | 5.4 Watts |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 11.75 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.4 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 5 |
Finish
The decorative finish of the item.
| White |
Lettering Color | None |
Housing | White Flame Retardant Plastic |
Mounting | Easy connect back plate snaps into place making the electrical connection. Back plate fits most standard junction boxes. Hardware included. |
Shape | Rectangle |
Installation Type
The way in which a fixture attaches to its relevant surface.
| Flush |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |