243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

12V, (16) 1 Ft. LED Flexible Tape Sections, 2700K - Black Face

SKU: 98678SW-12 | Ordering Code: 98678SW-12

Sorry, this product is not available to purchase.

Product Details


Sea Gull Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
48 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)


The decorative finish of the item.


Use self adhering industrial 3M adhesive (provided on back of strip) or included mounting clips.

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied


5 year limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location
Q & A

Sea Gull Lighting Brand (16) 1 ft. sections of Ambiance® Flexible LED Tape Light with black face.  Economical, super bright. Connects to other sections of 12V LED Tape lighting.  Contains 12 LEDs per foot on a flexible copper strip encased in optically clear protective coating.  Works and dims with all 12VAC magnetic transformers.  For increased light output LED tape lighting can also be powered by 12 VDC LED power supply unit.  Installs easily on surfaces with included clips or self adhering industrial 3M adhesive (provided on back of strip).

Power supply required.  Use # 98050-12 for plug-in power or # 98061-12 for direct wire transformer.

  • Versatile LED linear lighting, ultra low profile 1/8"H x 3/8"W - easily fits into any space, flexible bend lengthwise or curve laterally
  • The look and feel of halogen and xenon while reducing energy and operating costs by up to 90%
  • Lumen package is comparable to traditional undercabinet lighting 10W xenon to 20W halogen 4" to 6" on center
  • Long 40,000 hour life lasts 20 times longer than halogen for maintenance free operation
  • 12VAC or 12VDC operation, dimmable with a wide range of incandescent and ELV dimmers
  • Maximum run length for 12V is 20 feet
  • ETL listed, damp location
  • Environmentally friendly - contains no mercury and emits no UV or IR
  • Also available in 2", 12" and 5' sections and with a wide variety of connectors

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    Where do I look at the connectors? If I want to install a five foot four inch run, do I connect five 12 inch sections and then two 2 inch sections using connectors? I am assuming that I can not cut and splice these strips. Please confirm. All easy questions but I wanted to make sure. Thanks.
    Asked on 1/11/2015 by Mikeowens125 from Palms, MI (shore of Lake Huron)

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist


      You can connect each section together without connectors. The connectors would only be needed if you're going around corners or if you're cutting the tape. You can cut the tape, but this will void the ETL listing (similar to UL). We don't recommend cutting the tape for this reason. You can mix and match different lengths to come up with the total length you need, but keep in mind the maximum run for each.

      Answered on 1/22/2015 by Anonymous
Displaying question 1

Do you have a question about this product? 

BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.