Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

32 Watt LED Wallpack Light Fixture

SKU: RPSWP7CWXDBX | Ordering Code: RPSWP7CWXDBX

Sorry, this product is not available to purchase.

Product Details

Brand

Relume Technologies

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
32 Watts

Line Voltage

120-277

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
9.063

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
18.5

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
9.188

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
60000

Light Output (Lumens)

A unit measurement of the rate at which a lamp produces light, most often provided in lumens or candlepower. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation.
 
Light Output (Lumens)
1744

Finish

Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.
 
Finish
Dark Bronze

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
70

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
5500

Housing

Die cast

Mounting

Can be mounted to electrical box or direct to surface

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Dark Sky Compliant

Dark Sky Compliant products have been approved by the International Dark Sky Association (IDA), which ensures that the Upward Light Output Ratio of the product is deemed "full cut-off" or "fully shielded". This means that the luminous intensity (in candelas) at or above an angle of 90 above nadir is zero, and the luminous intensity (in candelas) at or above a vertical angle of 80 above nadir does not numerically exceed 10% of the luminous flux (in lumens) of the lamp or lamps in the luminaire.
 
Dark Sky Compliant
Yes

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
 
Wet Location
Yes

Warranty

7 year limited
Description
 
Reviews
 
Q & A

Relume Technologies 32 watt LED Wallpack Light Fixture is full cut-off quarter moon and is the energy solution for building facades, entrances, corridors and other pedestrian areas.  Patented Relume Silver Circuitry™ ensures excellent thermal management and low LED junction temperatures - the key to long LED life.  The LED light engine is protected by a tempered glass lens.   

Product will ship in approximately 10 business days from receipt of order.    

  • Driver operates over voltages ranging from 120-277 and has a power factor greater than 0.98 and a total harmonic distortion (THD) of less than 20%
  • Fluctuations in line voltage have no effect on luminous output
  • Driver has voltage surge protection to withstand high repetition noise transients
  • Constructed from die cast aluminum, with hinged front frame and powder coated with high-performance polyester resin for a rugged and maintenance-free finish.  
  • Equivalent up to a 100 metal halide
 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.