Sorry, this product is not available to purchase.
Product Description–
American Lighting Brand 1-100 Watt Hardwire LED Power Supply Driver for American Lighting LED Flexform tape light.
- Constant voltage
- 12V DC
- Non-Dimming
- 15" 3C 18AWG input leads
- 15" 2C 16AWG output leads
- Use with 14AWG (min) supply wire, copper conductors only
- c/UR/us Recognized
Full Specs–
Brand | American Lighting |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 12 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 9 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.563 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1.625 |
Finish
The decorative finish of the item.
| Black |
Manufacturer Warranty | 2 year limited |
Maximum Load (Watts)
The maximum power that a product can handle.
| 100 |