Sorry, this product is not available to purchase.
- Estimated life of 54.8 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Product Description–
American Lighting Brand 15' Flexbrite LED rope light kit. Ideal for cove lighting, cabinets (above or below), bookshelves, toe kick (kitchen or bath), and decks. Flexbrite LED emits virtually no heat and is cool to the touch. Contains everything you need for easy, professional results - One (1) 15' strip of LED Flexbrite, attached power cord and fifteen (15) mounting clips and screws. Suitable for commercial or residential lighting. Track # DL-TRACK-4 is recommended for straight line installations and will help in keeping the rope light from turning after installation.
This product is not a chasing rope light. For chasing rope lights please contact Bulbs.com at 888.455.2800. A separate chasing controller will also be needed.
You can interconnect multiple rope lights without any tools. Although, for best color matching of LEDs we recommend using the same length kits (ex. all 9' kits). Connecting a 9' kit to a 15' kit may result in visible color difference in LEDs.
In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube.
- Indoor/Outdoor rated
- The flexibility of incandescent rope light - without the heat!
- Interconnect multiple LED kits together - up to 240 feet.
- Uses the highest grade PVC available a newly developed UV inhibitor to help ensure its longevity
- Heat resistant clear PVC housing with LEDs every 1", positioned vertically
- Provide switched outlet for On/Off and dimming control
- Dimmable with most standard incandescent, low voltage magnetic and low voltage electronic dimmers. Check local electrical code and minimum load of dimmer
- Linkable design allows quick and easy interconnection with jumpers (sold separately) or directly end-to-end
- UL Listed
Full Specs–
Brand | American Lighting |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 11.5 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| Rope Light |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 73 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 2100 |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 60000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 120 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 180 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 0.5 |
Finish
The decorative finish of the item.
| Warm White |
Mounting | Clear plastic mounting clips or track |
Manufacturer Warranty | 1 year warranty |
Linkable | Yes |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |