Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

26 Watt, Enclosed Industrial Wet Location LED Fixture

SKU: ST74WA23A40UMKB | Ordering Code: ST74WA23A40UMKB

Sorry, this product is not available to purchase.

Product Details

Brand

Philips - Lightolier

Input Watts

26

Line Voltage

120/277

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
5.188

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
7

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
49.813

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Light Output (Lumens)

A unit measurement of the rate at which a lamp produces light, most often provided in lumens or candlepower. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation.
 
Light Output (Lumens)
2319

Finish

Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.
 
Finish
White molded fiberglass reinforced polyester body

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
4000

Housing

Non-conductive, non-corrosive

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
 
Wet Location
Yes

Vapor Proof

Yes

Warranty

5 years limited
Description
 
Reviews
 
Q & A

Lightolier Philips 26 Watt, Sealatron enclosed industrial wet location LED fixture. 

Application:  Ideal for parking garages, canopies or any other location where an outdoor sealed wet location fixture is needed.

Other wattage/lumen output Sealatron fixtures are available.

  • IP 65 rating standard
  • Acceptable for outdoor as well as indoor installations
  • Can be surface (wall/ceiling) or suspended mounted
  • Wet Location - Areas of high humidity, water vapor, rain, incidental water spray or other non-corrosive or non-flammable liquid
  • Provides full illumination in low temperature
  • Can replace 2-lamp T8 model in cold environment
  • Mounting brackets available, order separately
 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.