Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Product Description–
Lighting Facts Per Bulb |
| Brightness 500 lumens |
|
Estimated Yearly Energy Cost $1.52
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
5100 K
|
| Energy Used12.6 watts |
This Two-Light Motion Activated LED Security Light Fixture is perfect for a backyard or driveway. Selectable motion timer (1 min., 5 min. or 20 min.). Detects natural lighting to control ON/OFF Dusk-to-Dawn lighting. LED indicator confirms motion. Equivalent to a 75 watt incandescent.
-
180° motion detection up to 70 ft.
-
Swivel arms for omnidirectional light and adjustment arm for aiming motion sensor
-
All metal housing for rugged durability; tempered glass lens; single-hole mounting for easy installation
-
Test mode for daytime setup
-
UL listed
Uses 8 - 1.5W LED - Included
Full Specs–
Brand | Heath / Zenith |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 12.6 Watts |
Line Voltage | 120 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 70 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 5100 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 500 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Number of Lamps | 8 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 8.5 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 9.75 |
Finish
The decorative finish of the item.
| White |
Watts per Bulb | 1.5 |
Housing | Metal |
Detection Range (ft) | 70 |
Range of Motion (degrees) | 180 |
Mounting Position | Wall |
Manufacturer Warranty | 3 years limited |
Motion Sensor | Yes |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
Lighting Facts Approved
Lighting Facts is a program of the US Department of Energy, designed to ensure that the LED products you find on the market meet your expectations for performance.
| Yes |