Sorry, this product is not available to purchase.
Product Description–
Simkar 2' x 2' Altus Recessed Direct/Indirect Fluorescent Fixture. Adjustable Center Perf. Shield for customized performance, distribution, versatility and aesthetics. Uses 2 lamp 40W TT5, 22", Electronic Ballast. 120-277V. LAMPS NOT INCLUDED.
The product image for this item has been provided by the manufacturer and may not accurately represent all specifications of the product. Please refer to the technical specifications of the product for the most accurate information.
Full Specs–
Brand | Simkar |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 or 277 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
| Electronic |
Battery | None |
Bulb Type Supplied
Type of bulb supplied with the fixture
| None |
Replacement Lamp | TT5 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 24 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 24 |
Nominal Length (ft)
The length to the nearest foot (or half foot in particular cases) that linear bulbs or fixtures will fit.
| 2 |
Watts per Bulb | 40 |
Lettering Color | None |
Housing | Rigid Unibody Construction |
Mounting | Recessed |
Installation Type
The way in which a fixture attaches to its relevant surface.
| Recessed |