Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

3 Watt, LED MR16 Lamp with GU10 Base - While Supplies Last!

SKU: 406736 | Ordering Code: 4GU10/END/3000 120V

Sorry, this product is not available to purchase.

Product Details

Brand

Philips

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
3 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
MR-16/L

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
GU10

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
25

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
2

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
2.1

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
16000

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
100

Finish

Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.
 
Finish
Warm White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000K

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
 
Center Beam Candle Power
480

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Product Notes: NOT FOR USE WITH DIMMERS, Do Not Use In Enclosed Fixtures, Do Not Expose to Weather. Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation. If Your Fixture Already Has a Lens, Remove It (If Possible) for Best Optics and Heat Exchange. Must Be Used with MAGNETIC Transformer of < 13.5VAC.

Description
 
Reviews
 
Q & A

Philips EnduraLED Brand 3 Watt lamp replaces lower wattage MR16 lamps with GU10 base.

  • Perfect to use anywhere you are using an MR16 halogen lamp with a GU10 base

  • No lead or mercury means easy and environmentally safe disposal

  • 100 Lumens initial light output

  • VERY long life - rated to still put out 70% as much light after 16,000 hours of operation as it does when brand new

CHECK PRODUCT FIT BEFORE INVESTING IN MANY-Product May Not Fit in Your Fixture.  Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life. DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb.

 

REVIEW SNAPSHOT®

by PowerReviews
Philips Lighting Company3 Watt, LED MR16 Lamp with GU10 Base - While Supplies Last!
 
2.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(0 of 1 customers found this review helpful)

 
2.0

Energy Mizer

By JDH

From Portland ME

About Me Quality Oriented

See all my reviews

Verified Buyer

Pros

  • Long Life
  • Reduces Energy Costs

Cons

  • Weak Light

Best Uses

  • Smaller areas

Comments about Philips Lighting Company 3 Watt, LED MR16 Lamp with GU10 Base - While Supplies Last!:

This small GU10 does not have the best color and has next to no strength. Good for highlighting smaller wall hangings in narrow hallways. Not good for general light, I'd say. BUT, the light it does put out for 4 watts is amazing!

  • Primary use:
  • Personal

Displaying review 1

Back to top

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    I have this lamp connected to a regular toggle wall switch. There is a 0.5-1.0 second delay between flipping the switch and the lamp lighting. Is this normal?
    Asked on 10/14/2011 by Anonymous from chicago

    1 answer

    • CUSTOMER CARE

      A:

      The short delay is normal and inherent with many LED bulbs in the marketplace today.

      Answered on 10/17/2011 by Product Support from Bulbs.com
Displaying question 1

Do you have a question about this product? 

 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.