Coronavirus (COVID-19) Update: Bulbs.com is committed to health and safety. Learn More »
Coronavirus (COVID-19) Update: Bulbs.com is committed to health and safety. Learn More »

Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Philips Advance Electronic Dimming Ballast 277V for (2) 26W CFL for Line Voltage Switches

SKU: VEZ2Q26M2LDK | Ordering Code: VEZ2Q26M2LDK  | UPC: 781087028117

Sorry, this product is not available to purchase.

Product Highlights

  • Ignites up to two 4-Pin lamps
Description
  • Clearance

Advance Mark 10 Powerline brand 277 volt DIMMING Electronic Ballast for use with line voltage switches

  • Optimized for Two 26W Quad Tube 4-Pin (PL-C style) compact fluorescent lamps
  • Also ignites any two 4-Pin 26W CFL lamps

An easy 1-2-3 dimming solution without the need for addition control lead wires

  • 1 - Replace the ballast
  • 2 - Replace the switch
  • 3 - Dim the lights

Kit includes:

  • Multi-Exit ballast
  • Snap Mount Adapter Plate with Bottom Studs
  • Lead Wire Set
  • Wire Removal Tool
Full Specs

Brand

Advance Transformer

Product Line

Mark 10 Powerline

Input Volts

277

Input Watts

26

Number of Lamps

2
Ballast Factor

Ballast Factor

The percentage of a lamp's rated lumen output that can be expected when operated on a specific commercially available ballast. For example, a ballast with a ballast factor of 0.93 will result in the lamps emitting 93% of their rated lumen output. A ballast with a lower ballast factor results in less light output and also generally consumes less power.
 
5-100%
Ballast Type

Ballast Type

Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
 
Electronic
Length (in)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
4.5
Width (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
3
Height (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
1.3

Power Factor

98%
Total Harmonic Distortion (THD)

Total Harmonic Distortion (THD)

Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
 
10%

Lamps by Wattage

2x6W
Ballast Lamp Type

Ballast Lamp Type

The type of bulb the ballast can fire.
 
4-Pin
Start Type

Start Type

For Ballasts, indicates the method the ballast uses to start its bulbs. HID ballasts can be Probe or Pulse start. Fluorescent ballasts can be Rapid, Instant or Programmed start. For HID and Fluorescent bulbs, indicates the start-type of ballast that the bulb will work with.
 
Programmed
Dimming

Dimming

Dimming ballasts provide dimming capability when used with an appropriate controller and lamp.
 
Yes