Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 140 lumens |
|
Estimated Yearly Energy Cost $4.35
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day45.7 years
|
|
Light Appearance
WarmCool
2400 K
|
| Energy Used36.1 watts |
American Lighting 16.4 ft., TRULUX standard grade 24V, 2400K LED tape light. Includes tape light, one direct-wire input connector and one direct-wire output connector.
Doesn't include the power driver, sold separately. Please contact a Bulbs.com Lighting Specialist to help select the correct American Lighting LED driver for your length of tape light.
Application suggestions: Edge Lighting, Cabinetry, Shelving, Coves, Staircases, Toe Kicks, Railings, Task Lighting and Display Cases
- Excellent color rendering (94+ CRI) creates a natural light that displays colors accurately
- 2.2 watts per foot, 140 lumens per foot
- Dimmable with most electronic low voltage (ELV) dimmers
- Run lengths up to 32.8 feet
- LEDs spaced every 1.3"
- UL listed
- IP65 - Totally protected against dust ingress and protected against low pressure water jets from any direction
- Cuttable every 6.56" while maintaining UL
Brand | American Lighting |
Product Line | TRULUX |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 36.1 Watts |
Line Voltage | 24 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 94 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 2400 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 140 |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -4 to 104 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 196.8 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 0.41 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 0.09 |
Finish
The decorative finish of the item.
| White |
Warranty | 3 year limited |
Linkable | Yes |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Recommended With This Product