Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

White Tape Lights

American Lighting 32.8 Ft. Standard Grade LED Tape Light, 24V, IP54, 4000K

SKU: STL-WH-33 | Ordering Code: STL-WH-33  | UPC: 714176004068

$241.38each
Item
Add to Cart
Save to BulbTrack ?

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

Ships from SupplierUsually ships in 1-2 business days.

This item does not ship outside the US

This item qualifies for free ground shipping *

Product Highlights

  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 155 lumens
Estimated Yearly Energy Cost $8.7
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
4000 K
Energy Used72.2 watts

American Lighting 32.8 ft., TRULUX standard grade 24V, 4000K LED tape light. Includes tape light, three power feed snap connectors to bare wires and three power feed snap connectors to DC jack. 

Doesn't include the power driver, sold separately. Please contact a Bulbs.com Lighting Specialist to help select the correct American Lighting LED driver for your length of tape light. 

Application suggestions: Edge Lighting, Cabinetry, Shelving, Coves, Staircases, Toe Kicks, Railings, Task Lighting and Display Cases  

  • Excellent color rendering (94+ CRI) creates a natural light that displays colors accurately
  • 2.2 watts per foot, 155 lumens per foot 
  • Dimmable with most electronic low voltage (ELV) dimmers
  • Can't be linked to another tape light section
  • LEDs spaced every 1.3"
  • UL listed
  • IP54 - Limited protection against dust ingress and protected against splash water from any direction
  • Cuttable every 6.56" while maintaining UL

 

Product Documents

Full Specs

Brand

American Lighting

Product Line

TRULUX
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
72.2 Watts

Line Voltage

24
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
94
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
4000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
155
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-4 to 104
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
393.6
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
0.41
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
0.09
Finish
The decorative finish of the item.
White

Warranty

3 year limited
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes
Customers Also Bought