Sorry, this product is not available to purchase.
- Estimated life of 127.9 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Lighting Facts Per Bulb |
| Brightness 2040 lumens |
|
Estimated Yearly Energy Cost $2.17
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day127.9 years
|
|
Light Appearance
WarmCool
6500 K
|
| Energy Used18 watts |
On
sale
The Universal Everline single sided Sign Tube is an LED outdoor retrofit replacement solution for T12HO or T8HO lit signs. Designed for fast and easy installation, the Sign Tube uses the existing RDC sockets without modification. Features a 90º adjustable RDC style endcaps for correct lamp orientation in vertical or horizontal installations, regardless of how the socket was originally installed. The durable acrylic tube is a Class II, 24V Constant Voltage product that can be installed daisy-chain or parallel wiring.
Must be used with an LED driver, not included. Recommended drivers are Everline # L24V100UNV-A000I for dry locations or Everline # L24V100UNV-Q000I for IP67 wet locations. Run up to 32' of single sided tubes on either driver.
- Utilizes the same spacing as standard fluorescent systems
- 12" on center spacing
- As close as 5" to the sign face
- Lead length 8"
- LED Sign Tube is to be mounted using standard R17D recessed double contact (RDC) lampholders where the spring tension will hold the tube in place. Lampholders are not used for electrical connections.
Brand | Everline |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 18 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 24 |
Base
The end (or ends) of the lamp that fits into the socket.
| R17d |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| T-12 |
Bulb Color
The color of the light produced by a bulb
| Daylight White |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 82 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 6500 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 2040 |
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Clear |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 140000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -22 to 140 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 72 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 1.5 |
Warranty | 5 year limited |