Today's Offers
Today's OffersHide
Get a free Monkey fan with this BloomBoss kit. Use promo code MONKEY at checkout.
FREE SHIPPING on orders over $99

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

Lunera 30/40/50 Watt, 70/100/175 Watt Equiv., LED High Bay Retrofit Lamp, 5000K, Vertical Mount, Uses Existing MH Ballast

SKU: 931-00036 | Ordering Code: SN-V-E26-MultiW-5000K-G2  | UPC: 087169997167

Sorry, this product is not available to purchase.
  • Energy efficient replacement for a 70/100/175 watt HID bulb
  • Estimated life of 45.7 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal

The Lunera Susan Lamp 175/100/70 is a vertical mount plug 'n play replacement for metal halide (MH) lamps with an E26 medium base. With a significant lower energy consumption than conventional metal halide lamps, this LED lamp replaces a 70, 100 or 175 watt metal halide lamp. Lunera's BallastLED technology makes the lamp truly plug 'n play by allowing it to operate directly off of a 70 watt (M98), 100 watt (M90) or 175 watt (M57) existing metal halide ballasts. Simply replace the existing metal halide lamp with the Susan Lamp without making any modifications to the fixture. 

  • Replaces a 70, 100 or 175 watt metal halide lamp
  • Proprietary Thermal IQ™ Lunera technology enables the Susan Lamp to operate reliably up to 150ºF ambient 
  • Plug 'n play installation with existing installed magnetic ballast
  • Ultra-low energy draw, extends existing magnetic ballast life
  • Can be used in enclosed fixtures. Minimum lamp compartment dimensions are 11 3/4" diameter and 7" deep
  • This lamp is NOT approved for use with line voltage

DO NOT "hot swap" this lamp. Turn off fixture before replacing existing bulb. This lamp only operates on existing magnetic metal halide ballasts. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. 

Full Specs


Lunera Lighting

Model Number


Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
30/40/50 Watts

HID Equivalent

The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
HID Equivalent


The end (or ends) of the lamp that fits into the socket.
Medium (E26)

Bulb Color

The color of the light produced by a bulb
Bulb Color
Bright White


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (Lumens)

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
Bulb Finish

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
Bulb Technology

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
Operating Temperature (°F)
-40 to 100

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)




5 year limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location
Customers Also Viewed
Customer Reviews
Q & A