Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Orion Outdoor Wall Sconce with 70 Watt HPS Lamp, Voltage Must be Specified When Ordering

SKU: QWPC36FH70QL | Ordering Code: QWPC36FH70QL

Sorry, this product is not available to purchase.
Description

Value Brand Orion Outdoor Wall Sconce. Includes 70 Watt High Pressure Sodium Lamp.

Voltage must be specified when ordering.

  • Bronze Die Cast Aluminum Housing
  • Tempered Flat Clear Glass Lens With Forward Throw Aluminum Reflector
  • High Power Ballast of 120/208/240/277 Voltage

Full Specs

Brand

Value Brand

Line Voltage

120/208/240/277

Number of Lamps

1
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
High Power
Bulb Type Supplied
Type of bulb supplied with the fixture
High Pressure Sodium

Replacement Lamp

High Pressure Sodium
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
18.125
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
9.063
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
9.188
Finish
The decorative finish of the item.
Dark Bronze

Watts per Bulb

70

Housing

Die Cast Aluminum

Mounting

Mount Over a 4" Recessed Outlet Box, Includes Easy-Hang Wall Mounting Plate
Dark Sky Compliant
Dark Sky Compliant products have been approved by the International Dark Sky Association (IDA), which ensures that the Upward Light Output Ratio of the product is deemed "full cut-off" or "fully shielded". This means that the luminous intensity (in candelas) at or above an angle of 90 above nadir is zero, and the luminous intensity (in candelas) at or above a vertical angle of 80 above nadir does not numerically exceed 10% of the luminous flux (in lumens) of the lamp or lamps in the luminaire.
Yes

Photocell

No
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes