Sorry, this product is not available to purchase.
Value Brand Small Wallpack* with Bronze Die Cast Aluminum Housing and Polycarbonate Lens. Includes Clear 70 Watt High Pressure Sodium Lamp (ED17) with Medium Base, mounting plate and a Magnetic Ballast (S62) of 120 Voltage.
The product image for this item has been provided by the manufacturer and may not accurately represent all specifications of the product. Please refer to the technical specifications of the product for the most accurate information.
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
|High Pressure Sodium
|70W Standard HPS Lamp w/ Medium Base (S62)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
The decorative finish of the item.
Watts per Bulb
|Bronze Polyester Powder on die Cast Aluminum
|Back Plate Knockouts Mount to Standard Recessed Electrical Boxes. Mounting plate also included.
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Powerful Wallpack in a Small Package
This 70 watt high pressure sodium wallpack has a die cast aluminum housing, ½" coin plugs with O-rings for conduit & photocell (field installed) and a textured architectural bronze powdercoat finish over a chromate conversion coating. It has an aluminum reflector and a prismatic polycarbonate hinged diffuser with UV inhibitors & gasket. Photometrics shows that, based on a 10 foot mounting height, the distance from the fixture is 37.5 feet you would get one foot candle. This wallpack is wet location listed. Wallpacks are perfect for security lighting, lighting pathways and general area lighting.
Eric C. - Category Manager
Wallpack Fixture (Small) with 70 Watt HPS Lamp
Q & A
- Can this fixture use an LED bulb instead of HPS?
There is no direct LED replacement for a 70W HPS lamp on the market today.