Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 20 watt bulb
- Estimated life of 27.4 years based on 3 hours use per day
American Lighting Omni LED puck lights are durable low voltage and available in 2700K warm white.
Includes one 12V plug-in dimmable driver, three LED pucks each with 78" lead and mounting hardware. Driver included supports up to 3 pucks in a dimming or a non-dimming application. When adding additional pucks over three you'll need to purchase either #ELV-30-12 driver for up to 8 pucks in a dimming application or up to 9 pucks for a non-dimming application or # ELV-45-12 driver for up to 13 pucks in a dimming application or up to 14 pucks in a non-dimming application.
- Zinc alloy LED housing with aluminum heat sink
- Stamped steel surface collar with nickel finish
- Polycarbonate lens diffuses light
- Over twice as bright as xenon puck lights
- Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place
- Surface mount or recess mount (2-1/4” cut-out)
- Maximum run depends on capacity of driver
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The wattage value of an incandescent or halogen lamp of similar brightness.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Beam Angle (°)
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
The decorative finish of the item.
|Surface or recessed
|3 year limited
Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.