Sorry, this product is not available to purchase.
- No lead or mercury means easy and environmentally safe disposal
Lumitec NevisLT utility marine light with a brushed finish and a white non-dimming output
- More than 1,000 integrating sphere tested lumens
- Douses hard to light areas with a 180-degree spread of bright even light
- Completely sealed and compatible with most PWM LED dimmers
- Certified Ignition Protected (safe for engine rooms and will not cause fires)
Brand | Lumitec Lighting |
Product Line | Nevis |
Model Number | NevisLT Surface Mount |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 10-30vDC |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 70 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 1000 |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -31/35 to + 131/55 F |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 2.5 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 5 |
Depth (in)
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
| 0.63 |
AC Input (Watts)
| 16 |
Charging Current (Amps)
The amount of current to charge a battery.
| 12v DC Amps: 1.3A/24v DC Amps: 600mA |