Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 7 watt bulb
- Estimated life of 45.7 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
On
sale
American Lighting dimmable 0.35 watt red C7 LED bulb generates as much light as many 7 watt C7 decorative incandescent bulbs.
- Can be used in outdoor applications
- E12 nickel base with durable, colored plastic lens cover to resist breakage and fading
- Saves 6.65 watts in electricity
- Very long life - Rated to still put out 70% as much light after 50,000 hours of operation as it did when brand new
Not recommended for use in fully enclosed fixture because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.
Brand | American Lighting |
Model Number | NC7D-LED-RE |
Energy Used
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 0.35 Watts |
Incandescent/Halogen Equivalent
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
| 7 Watts |
Volts
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 |
Base
Base
The end (or ends) of the lamp that fits into the socket.
| Candelabra (E12) |
Bulb Shape
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| C-7 |
Bulb Color
Bulb Color
The color of the light produced by a bulb
| Red |
Bulb Finish
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Clear |
Bulb Technology
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -4 to 113 |
Length (in)
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 2.1 |
Diameter (in)
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 0.8 |
Wet Location
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| No |
Damp Location
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Dimmable
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |