Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 50 watt bulb
- Estimated life of 22.8 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Lighting Facts Per Bulb |
| Brightness 525 lumens |
|
Estimated Yearly Energy Cost $0.84
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day22.8 years
|
|
Light Appearance
WarmCool
3000 K
|
| Energy Used7 watts |
ENERGY
STAR
Bulbrite 13 watt 3000K soft white PAR20 dimmable flood LED bulb generates as much light as many 50 watt halogen bulbs.
- Silver finish and lens closely resemble traditional halogen PARs
- Enclosed and wet rated for outdoor use
- No lead or mercury means for easy disposal and a better environment
- Saves 37 watts in electricity compared to a 50 watt halogen
- Very long life - Rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.
Brand | Bulbrite |
Product Line | LED Plus |
Model Number | LED7PAR20/FL40/830/WD |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 7 Watts |
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
| 50 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 |
Base
The end (or ends) of the lamp that fits into the socket.
| Medium (E26) |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| PAR-20 |
Bulb Color
The color of the light produced by a bulb
| Soft White |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 80 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 3000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 525 |
Center Beam Candle Power
Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area.
Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting.
Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
| 680 |
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Clear |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 25000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -4 to 104 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 40 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 3.125 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 2.5 |
Warranty | 5 year limited |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
| Yes |
ENERGY STAR Certified
ENERGY STAR is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. ENERGY STAR-certified devices use less energy without compromising functionality.
| Yes |
ENERGY STAR Number
Number identifying the product in ENERGY STAR certification listing.
| 2288429 |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Rated for Fully Enclosed Fixtures
Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
| Yes |
Not For Sale In
This bulb falls within State-defined sales restrictions for the listed States.
| CA |