Today's Offers
Today's OffersHide
Get 20 free bulbs with purchase of $199 or more, use code 20BULBS at checkout.
15% off all Lunera products. Use promo code LUNERA15 at checkout.
New low prices on brand bulbs
Get a free Monkey fan with this BloomBoss kit. Use promo code MONKEY at checkout.
FREE SHIPPING on orders over $99

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

NaturaLED Dimmable 9 Watt 3000K 4" Recessed LED Downlight

SKU: 7092 | Ordering Code: LED4RL-56L30K  | UPC: 844366070921

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a conventional 50 watt bulb
  • Estimated life of 32 years based on 3 hours use per day

Lighting Facts Per Bulb

Brightness 560 lumens
Estimated Yearly Energy Cost $1.08
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day32 years
Light Appearance
3000 K
Energy Used9 watts

NaturaLED dimmable 4" LED recessed downlight, 9 watt downlight replaces existing R20 incandescent lamps with a more energy efficient, longer lasting, and more technologically advanced alternative. 

  • No lead or mercury means easy and environmentally safe disposal

  • Saves 41 watts in electricity

  • VERY long life - rated to still put out 70% as much light after 35,000 hours of operation as it does when brand new


Compatible with the following Lutron dimmers.  Maximum of four (4) units per circuit.

  • Skylark S-600, S600P, S-603P
  • Diva DV-600P, DV-603P, 
  • Toggler TG-600, TG-600P, TG-603
Full Specs



Model Number


Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
9 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
Incandescent/Halogen Equivalent
50 Watts

Line Voltage



The end (or ends) of the lamp that fits into the socket.
Medium (E26)


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (Lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
Beam Angle (°)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)


The decorative finish of the item.

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied

Installation Type

The way in which a fixture attaches to its relevant surface.
Installation Type
4" Can

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location


Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
Customers Also Viewed
Customer Reviews
Q & A